Q: The instructions say the second coat needs to be applied within 10 minutes (wet-on-wet), will I be able to walk on the 1st coat or should I avoid walking on it? 

Published Thursday 21st of June 2018 // Updated Tuesday 29th of May 2018

A: A wet-on-wet application method is recommended when applying penetrating products in order to drive penetration and get the substrate to absorb as much sealer as possible. This wet-on-wet application method refers to the second coat being applied while the first coat is still wet. You can most definitely walk on the first wet coat to apply a second coat. Since penetrating sealers are not film-forming, footprints and impressions will not be left once the product is fully cured.

shield-bullet Tip: Keep a damp rag on hand to wipe off the soles of your shoes in the event they pick up damp material.

Siloxa-Tek 8510

Water, oil & salt repellent

Lithi-Tek 9500

Waterproofer & densifier

Siloxa-Tek 8505

Water, oil & salt repellent

Siloxa-Tek 8500

Water & salt repellent

KreteTek Industries, Inc. // Facebook // Twitter // Google+