Water Repellent
Patio Pool Deck Sealer
Cryli-Tek 5505
Solvent-Based
Ready-to-use
Best used where a high gloss or wet look finish is desired to enhance and darken the substrate.
When you are looking to bring out the colors and textures of a substate with a clear, non-yellowing finish the 5505 is an excellent choice. Since the 5505 is solvent based, it is the longest lasting sealer in the Cryli-Tek line. The 5505 can be applied to a substrate that has been previously sealed as long as the previous sealer was a solvent based acrylic. Keep in mind acrylic sealers do not last as long as penetrating sealers and may need to be reapplied more frequently.
One thin, even coat of the 5505 is applied with a 3/8” nap solvent rated high quality roller.
The 5505 may be slippery when wet. The Grip-Tek 250 slip resistant additive can be mixed in to the 5505 for added traction.
Cryli-Tek 5500
Water Repellent
Water-Based
Ready-to-use
Best used where a low gloss, wet look finish is desired. This water-based acrylic sealer has a low odor and is easy to use.
We took all the best attributes of the 5505 - clear, non-yellowing, UV stable and made it into a low gloss, water-based formulation. It is not overly glossy or shiny but will keep concrete and pavers protected from weathering while remaining breathable.
The 5500 is water based and VOC compliant in all 50 states making it a great option in areas with strict VOC laws.
One thin, even coat of the 5500 is applied with a 3/8” nap high quality roller.
Siloxa-Tek 8500
Water Repellent
Salt Repellent
Water-Based
Ready-to-use
Concentrated
A natural, flat finish stamped concrete sealer that will not change the look or appearance.
The 8500 is used to protect stamped concrete from water, salts and weathering. This can include deicing salts and salt water that may splash from a salt water pool. If concrete is exposed to salt and left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 is able to resist this salt damage and keep concrete strong and waterproof. Not only that but mold, mildew and efflorescence growths are reduced and are easily cleaned off. The 8500 is not recommended on stamped concrete that has been previously sealed or stained unless the sealer or stain has worn away or been removed.
Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush. The concrete retains its natural appearance after sealing and will not yellow or fade with UV light exposure.
Siloxa-Tek 8510
Water Repellent
Oil Repellent
Salt Repellent
Solvent-Based
Ready-to-use
If a natural finish is desired the Siloxa-Tek 8510 is the best performing and longest lasting penetrating oil repellent concrete sealer to use. This high actives product is able to resist deicing salts and will make oil and grease stains easier to clean.
The Siloxa-Tek 8510 is our flagship concrete sealer and a triple threat when it comes to protecting against water, deicing salts and stain resistance from oils and greases. Because of the small amount of solvent carrier, this high actives penetrating sealer is the deepest penetrating and longest lasting sealer in the Siloxa-Tek line.
Available only in a ready to use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush. The concrete retains its natural, flat finish after sealing.
To increase the strength and performance of the Siloxa-Tek 8510, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8510.
The Micro-Degreaser 1100 can be used to degrease and remove soils and stains prior to using the Siloxa-Tek 8510.