Photo for Stamped concrete driveway sealed with a Ghostshield concrete sealer
8510 Concrete Sealer Bottle

Siloxa-Tek 8510

  • Water Repellent
  • Oil Repellent
  • Salt Repellent
  • Solvent-Based
  • Ready-to-use

The Siloxa-Tek 8510 is our highest performing and longest lasting concrete driveway sealer. Best used on concrete driveways to protect against water and resist deicing salts and staining from oils and greases.

The Siloxa-Tek 8510 is our flagship concrete sealer and a triple threat when it comes to protecting against water, deicing salts and stain resistance from oils and greases. Because of the small amount of solvent carrier, this high actives penetrating sealer is the deepest penetrating and longest lasting sealer in the Siloxa-Tek line.

Available only in a ready to use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush. The concrete retains its natural, flat finish after sealing.

To increase the strength and performance of the Siloxa-Tek 8510, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8510.

Photo for
8500 Concrete Sealer Bottle

Siloxa-Tek 8500

  • Water Repellent
  • Salt Repellent
  • Water-Based
  • Ready-to-use
  • Concentrated

Best used on driveways in climates exposed to winter and freeze-thaw cycles providing protecion against water and deicing salts.

The Siloxa-Tek 8500 is our favorite product to treat nearly any application. This driveway sealer can be used on a variety of substrates including concrete, brick, pavers, stamped concrete and exposed aggregate. The Siloxa-Tek 8500 is a water-based penetrating sealer that leaves a natural finish, meaning it will not change the look or appearance of the concrete.

The 8500 is used to protect driveways from deicing salts and mag chlorides. If concrete is left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 is able to resist deicing salt damage and keep concrete strong and waterproof.

Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush.

To increase the strength and performance of the Siloxa-Tek 8500, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8500.

Photo for
9500 Concrete Sealer Bottle

Lithi-Tek 9500

  • Water Repellent
  • Water-Based
  • Concentrated

Best used on concrete driveways that are not exposed to deicing salts or winter climates.

The Lithi-Tek 9500 is an excellent and cost effective concrete driveway sealer for driveways that will not be exposed to freeze-thaw cycles, winter climates or deicing salts. Only available in an ultra concentrated version, the 9500 is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet with a sprayer, roller or brush.

Photo for
5505 Concrete Sealer Bottle

Cryli-Tek 5505

  • Water Repellent
  • Solvent-Based
  • Ready-to-use

Best used to enhance driveways with a high gloss, wet look finish.

Although routine maintenance and reapplication may be required more frequently that with some of the other concrete driveway sealers, the Cryli-Tek 5505 is best used on decorative concrete driveways to enhance and add a wet look, high gloss finish. Best applied with a shed-less solvent rated roller or brush.

Planning a Project?
Start Here

Product Finder