Salt Repellent Concrete Sealer

Protect your concrete with a salt repellent concrete sealer to resist staining, deicing salts, chlorides, freeze-thaw cycles, spalling, cracking, water ingress, moisture, efflorescence, mold and mildew with the industry's longest lasting concrete sealers that will never yellow, crack or peel. Available in clear, matte, slip-resistant finishes guaranteed to last upwards of ten years.

Siloxa-Tek 8510

Water Repellent
Oil Repellent
Salt Repellent
Solvent-Based
Ready-to-use

The Siloxa-Tek 8510 is our highest performing and longest lasting penetrating concrete sealer. Best used on concrete, brick or masonry to protect against water and resist deicing salts and staining from oils and greases.

The Siloxa-Tek 8510 is our flagship concrete sealer and a triple threat when it comes to protecting against water, deicing salts and stain resistance from oils and greases. Because of the small amount of solvent carrier, this high actives penetrating sealer is the deepest penetrating and longest lasting sealer in the Siloxa-Tek line.

Available only in a ready to use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush. The concrete retains its natural, flat finish after sealing.

To increase the strength and performance of the Siloxa-Tek 8510, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8510.

The Micro-Degreaser 1100 can be used to degrease and remove soils and stains prior to using the Siloxa-Tek 8510.

Siloxa-Tek 8500

Water Repellent
Salt Repellent
Water-Based
Ready-to-use
Concentrated

The 8500 is the easiest to use and most versitle concrete sealer we offer. Best used on driveways in climates exposed to winter and freeze-thaw cycles providing protecion against water and deicing salts. Best used in basements to prevent moisture intrusion. Best used on patios to resist mold, midlew, efflorescence and water penetration.

The Siloxa-Tek 8500 is our favorite product to treat nearly any application. This concrete sealer can be used on a variety of substrates including concrete, brick, pavers, stamped concrete and exposed aggregate. The Siloxa-Tek 8500 is a water-based penetrating sealer that leaves a natural finish, meaning it will not change the look or appearance of the concrete.

The 8500 is used to protect driveways from deicing salts and mag chlorides. If concrete is left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 is able to resist deicing salt damage and keep concrete strong and waterproof. The 8500 is also used to treat basement floors and walls, paver patios, pool decks, chimneys and more.

Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version makes 5 gallons and is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush.

To increase the strength and performance of the Siloxa-Tek 8500, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8500.

The Micro-Degreaser 1100 can be used to degrease and remove soils and stains prior to using the Siloxa-Tek 8500.

Find More Concrete Sealer Products by Ghostshield

Product Finder

Find your product

Not sure which of our products best fits the needs of your project? Answer questions about your specific application for a product recommendation.