Photo for
5505 Concrete Sealer Bottle

Cryli-Tek 5505

  • Water Repellent
  • Solvent-Based
  • Ready-to-use

Best used where a high gloss or wet look finish is desired to enhance and darken the substrate.

When you are looking to bring out the colors and textures of slate and stone with a clear, non-yellowing finish the 5505 is an excellent choice. Since the 5505 is solvent based, it is the longest lasting sealer in the Cryli-Tek line. The 5505 can be applied to a substrate that has been previously sealed as long as the previous sealer was a solvent based acrylic. Keep in mind acrylic sealers do not last as long as penetrating sealers and may need to be reapplied more frequently.

One thin, even coat of the 5505 is applied with a 3/8” nap solvent rated high quality roller.

The 5505 may be slippery when wet. The Grip-Tek 250 slip resistant additive can be mixed in to the 5505 for added traction. If the wet look finish of the 5505 is too shiny the Matte-Tek 5000 may be added to reduce the gloss.

Photo for
8500 Concrete Sealer Bottle

Siloxa-Tek 8500

  • Water Repellent
  • Salt Repellent
  • Water-Based
  • Ready-to-use
  • Concentrated

A natural, flat finish slate and stone sealer that will not change the look or appearance. Water repellency and salt resistance make this our favorite slate and stone sealer.

The 8500 is used to protect slate and stone from water, salts and weathering. This can include deicing salts and salt water that may splash from a salt water pool. It can also include wind driven rain and moisture intrusion. The Siloxa-Tek 8500 is able to resist this weathering on exterior applications. Meanwhile slate and stone are kept strong and waterproof on interior applications. Not only that but mold, mildew and efflorescence growths are reduced and are easily cleaned off.

Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush. The concrete retains its natural appearance after sealing and will not yellow or fade with UV light exposure.

Photo for
8100 Concrete Sealer Bottle

Iso-Tek 8100

  • Salt Repellent
  • 100% Actives
  • Ready-to-use

Best used as a water repellent sealer on natural stucco or as a primer and bonding agent for stucco that will be painted.

This 100% actives silane sealer is the deepest penetrating, longest lasting and highest actives stucco sealer we offer. It is best used as a primer or bonding agent before painting stucco that has never been painted. It can also be used as a water repellent sealer on natural stucco to resist wind driven rain, moisture intrusion and weathering. It will also stunt mold and mildew growth making the organic growth easier to clean.

Available only in a ready to use version, two coats are easily applied wet-on-wet with a sprayer, roller or brush.

Planning a Project?
Start Here

Product Finder