A natural, flat finish paver sealer that will not change the look or appearance. Water repellency and salt resistance make this our favorite natural paver sealer.
The 8500 is used to protect paver patios, pool decks, driveways and walkways from water, salts and weathering. This can include deicing salts and salt water that may splash from a salt water pool. If concrete is exposed to salt and left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 is able to resist this salt damage and keep concrete strong and waterproof. Not only that but mold, mildew and efflorescence growths are reduced and are easily cleaned off.
Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush. The concrete retains its natural appearance after sealing and will not yellow or fade with UV light exposure.
All the benefits of the 8500 with the added benefit of resistance to staining from oils and greases.
The Siloxa-Tek 8510 is our flagship paver sealer and a triple threat when it comes to protecting against water, salts and oil and grease stains. This can include grease that may splatter from a BBQ grill, staining on a driveway and salt water that may splash from a salt water pool. Because of the small amount of solvent carrier, this high actives penetrating sealer is the deepest penetrating and longest lasting sealer in the Siloxa-Tek line.
Available only in a ready to use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush.
Best used where a high gloss or wet look finish is desired to enhance and darken the substrate.
When you are looking to bring out the colors and textures of pavers with a clear, non-yellowing finish the 5505 is an excellent choice. Since the 5505 is solvent based, it is the longest lasting sealer in the Cryli-Tek line. The 5505 can be applied to a substrate that has been previously sealed as long as the previous sealer was a solvent based acrylic. Keep in mind acrylic sealers do not last as long as penetrating sealers and may need to be reapplied more frequently.
One thin, even coat of the 5505 is applied with a 3/8” nap solvent rated, high quality roller. Since pavers are so porous an additional coat may be needed to bring up the sheen. One coat may leave more of a satin finish.
Best used where a satin or low sheen finish is desired. This low VOC, water based sealer will not enhance or darken the substrate but will give it a subtle shine.
We took all the best attributes of the 5505 - clear, non-yellowing, UV stable and made it into a satin finish water-based formulation. It is not overly glossy or shiny but will keep pavers protected from weathering while remaining breathable.
The 5500 is water based and VOC compliant in all 50 states making it a great option in areas with strict VOC laws.
One thin, even coat of the 5500 is applied with a 3/8” nap high quality roller.
Keep in mind acrylic sealers do not last as long as penetrating sealers and may need to be reapplied more frequently.
Not sure which of our products best fits the needs of your project? Answer questions about your specific application for a product recommendation.