Concrete Cleaner

Concrete cleaners are used to clean, brighten, etch, and degrease a substrate. The Ghostshield line of concrete cleaners are concentrated and can be used straight or mixed with water prior to application.

Micro-Degreaser 1100

Water-Based
Concentrated

A concrete cleaner and degreaser designed to remove oil and grease stains from soiled concrete and masonry

This safe, powerful, 100% biodegradable concrete cleaner and degreaser does not contain any acids, solvents, or VOC's. Not only does it clean concrete leaving it brighter in appearance but it lifts dirt, oil, greases, sludge and grime.

The 1100 is concentrated and can be used diluted with water prior to application The 1100 is applied using a low-pressure pump sprayer and flushed throughly with clean water. You do not need to neutralize after using Micro-Degreaser 1100.

Eco-Etch 1001

Water-Based
Concentrated

An acid free etcher and cleaner used to clean, lightly etch and brighten concrete and masonry

This safe, powerful, 100% biodegradable concrete cleaner does not contain any acids, solvents, or VOC's. Not only does it clean concrete leaving it brighter in appearance but it requires no neutralizing and has no odor.

The 1001 is a safer alternative to traditional acid based concrete watchers giving concrete surface profile and texture prior to applying a concrete sealer or concrete coating.

The 1001 is concentrated and can be used diluted with water prior to application

The 1001 is applied using a low-pressure pump sprayer and flushed thoroughly with clean water. You do not need to neutralize after using Eco-Etch 1001.

Hydro-Etch 1000

100% Actives
Concentrated

An acid based concrete cleaner used to clean, etch and brighten concrete and masonry

This powerful, acid-based cleaner is specifically formulated to clean, brighten and etch concrete & masonry in addition to removing concrete residue and salt deposits (efflorescence).

The 1000 is a less caustic alternative to muriatic acid. It gives concrete surface profile and texture prior to applying a concrete sealer or concrete coating.

The 1000 is concentrated and can be used diluted with water prior to application

The 1000 is applied using a low-pressure pump sprayer that is rated for acids. After etching the concrete with the 1000, concrete must neutralized with household ammonia or baking soda.

Product Finder

Find your product

Not sure which of our products best fits the needs of your project? Answer questions about your specific application for a product recommendation.

Available At