Index

The Siloxa-Tek 8500 concrete sealer is our favorite product to treat nearly any application. This concrete sealer can be used on a variety of substrates including concrete, brick, pavers, stamped concrete and exposed aggregate. The Siloxa-Tek 8500 is a {water-based, penetrating concrete sealer that leaves a natural finish; meaning it will not change the look or appearance of the concrete.

The Siloxa-Tek 8500 concrete sealer is used to protect concrete driveways from deicing salts and magnesium chlorides. If concrete is left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 concrete sealer is able to resist deicing salt damage and keep concrete strong and waterproof. The Siloxa-Tek 8500 concrete sealer is also used to treat basement floors and walls, paver patios, pool decks, chimneys and more.

Available in a ready-to-use version, or an ultra-concentrated version. The ultra-concentrated version makes 5 gallons and is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush.

To increase the strength and performance of the Siloxa-Tek 8500, apply one coat of the Lithi-Tek 4500 concrete primer five to seven days prior to sealing with the Siloxa-Tek 8500 concrete sealer.

The Micro-Degreaser 1100 concrete cleaner and degreaser can be used to degrease and remove soils and stains prior to using the Siloxa-Tek 8500 concrete sealer.

The Epoxy 325 is the first step in an epoxy floor coating system. This primer is applied after the concrete has been etched or grind-ed. Before applying an epoxy floor coating it is best to scarify and rough up the surface of the concrete in order for the coating to properly bond and adhere. This can be achieved by acid etching and neutralizing the concrete or by mechanically grinding the concrete with a floor grinder.

Once the surface has been properly prepped the Epoxy 325 can then be applied with an epoxy glide roller. The Epoxy 325 is available in a two component kit. Each kit contains a Part A and a Part B. Part A and Part B are mixed together with a drill or jiffy mixer. Once Part A and Part B are mixed the Epoxy 325 must be applied within 1 hour. About 7-10 hours after applying the Epoxy 325, the Urethane 645 can then be applied as a top coat.

The Epoxy 325 is available in clear or colored. If you are using a colored epoxy primer you are going to want to use the same color top coat. Paint chips (for decoration) or aluminum oxide (for slip resistance) can be cast into the wet epoxy and then top coated with the Urethane 645.

The combination of the Epoxy 325 primer and Urethane 645 top coat are excellent at stopping dusting, repelling oils, greases, chemicals and acids; however, they can only be used on indoor concrete floors.

If there is moisture in the concrete prior to application first use the Vapor-Tek 440.

The Micro-Degreaser 1100 can be used to degrease and remove soils and stains prior to using the Epoxy 325.

The Hydro-Etch 1000 can be used to etch the concrete prior to applying the Epoxy 325.

Commonly used on basements, concrete driveways and concrete patios, the Lithi-Tek 9500 is the most cost- effective concrete sealer we offer. In basements the Lithi-Tek 9500 is best used on new concrete or used preventatively on concrete that has never had any moisture issues. On concrete driveways and concrete patios the Lithi-Tek 9500 is best used to repel water and resist mold and mildew growth.

Lithi-Tek 9500 can only be used on poured concrete substrates and concrete that has never been stained or dyed.

The Lithi-Tek 9500 concrete sealer, densifier and waterproofer is concentrated, makes 5 gallons and needs to be mixed with distilled water prior to application. One part Lithi-Tek 9500 is mixed with 4 parts water. Two coats are applied wet-on-wet (the second coat is applied immediately after the first coat) with either a sprayer or roller.

The Urethane 645 is typically applied about 7-10 hours after applying the Epoxy 325. If more than 48 hours have elapsed since the Epoxy 325 primer has been applied it is best to lightly sand the surface of the Epoxy 325 to maximize the bond and adhesion of the Urethane 645.

The Urethane 645 is also available clear or colored and in a two component kit. Each kit contains a Part A and a Part B. Part A and Part B are mixed together with a drill or jiffy mixer. Once Part A and Part B are mixed the Urethane 645 must be applied within 2 hours.

One coat of the Urethane 645 is best applied with an epoxy glide roller. The Urethane 645 leaves a high gloss finish and is extremely easy to clean. However, it can also be slippery when wet. If maximum traction is desired 46 Grit Aluminum Oxide can be cast into the wet Epoxy 325 and then coated with the Urethane 645. If lesser traction is desired a slip resistant additive can be mixed into a kit of Urethane 645.

The combination of the Epoxy 325 primer and Urethane 645 top coat are excellent at stopping dusting, repelling oils, greases, chemicals and acids; however, they can only be used on indoor concrete floors.

Because of VOC restrictions in the State of California, the Urethane 645 cannot be used. A California compliant version of the Urethane is available for use in California.

The Siloxa-Tek 8510 is the highest performing and longest lasting concrete sealer in the Siloxa-Tek line. This deep penetrating concrete sealer formula offers exceptional protection and a service life of up to 15 years. Thanks to a proprietary flurocarbon, this near 100% actives silane/siloxane sealer blend is the only concrete sealer capable of repelling water, resisting deicing salts and resisting motor oil staining. Its hydrophobic nature resists freeze-thaw damage, mold, mildew and moisture intrusion.

Available only in a ready-to-use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush. The concrete retains its natural, flat finish after sealing.

To increase the strength and performance of the Siloxa-Tek 8510 concrete sealer, apply one coat of the Lithi-Tek 4500 concrete primer five to seven days prior to sealing with the Siloxa-Tek 8510.

We took our favorite all-around, concrete sealer and made it even better. Take all the best attributes of the Siloxa-Tek 8500 - resists water intrusion, deicing salts and chlorides and added to it resistance from staining. The same stain resistance technology found in the Siloxa-Tek 8510 concrete sealer is also in this water-based concrete sealer, making oil and grease clean-up easier. The main difference between the Siloxa-Tek 8510 and the Siloxa-Tek 8505 is that the Siloxa-Tek 8510 is solvent-based and the Siloxa-Tek 8505 is water-based.

Available in a ready-to-use version, or an ultra-concentrated version. The ultra-concentrated version makes 4 gallons and is mixed with 3 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet with a sprayer, roller or brush.

To increase the strength and performance of the Siloxa-Tek 8505 concrete sealer, apply one coat of the Lithi-Tek 4500 concrete primer five to seven days prior to sealing with the Siloxa-Tek 8505. When used as a primer it reduces porosity, prevents cracking and surface deterioration and increases adhesion of a top coat concrete sealer by up to 25%.

When you are looking to bring out the colors and textures of concrete and pavers with a clear, non-yellowing finish the Cryli-Tek 5505 is an excellent choice. Since the Cryli-Tek 5505 is solvent-based, it is the longest lasting concrete and paver sealer in the Cryli-Tek line. The Cryli-Tek 5505 concrete and paver sealer can be applied to a substrate that has been previously sealed as long as the previous sealer was a solvent-based acrylic. Keep in mind acrylic concerte and paver sealers do not last as long as penetrating concrete sealers and may need to be reapplied more frequently.

One thin, even coat of the Cryli-Tek 5505 concrete and paver sealer is applied with a 3/8” nap, solvent rated, high quality roller.

The Cryli-Tek 5505 concrete and paver sealer may be slippery when wet. The Grip-Tek 250 slip resistant additive can be mixed in to the Cryli-Tek 5505 for added traction.

We took all the best attributes of the Cryli-Tek 5505 concrete and paver sealer - clear, non-yellowing, UV stable and made it into a low-gloss, wet look, water-based formulation. The acrylic resins used in this formula have been independently tested and are more durable and last longer than other acrylic concrete and paver sealers on the market. Protects and enhances the look of decorative concrete and paver surfaces for up to 3 years. Treated concrete and paver surfaces resist staining, surface deterioration and hot tire pickup while eliminating concrete dusting.

The Cryli-Tek 5500 concrete and paver sealer is water-based and VOC compliant in all 50 states making it a great option in areas with strict VOC laws.

One thin, even coat of the Cryli-Tek 5500 concrete and paver sealer is applied with a 3/8” nap high-quality roller.

The Epoxy Max 100 basecoat is the first step in an epoxy floor coating system. Before applying an epoxy floor coating it is best to scarify and rough up the surface of the concrete in order for the coating to properly bond and adhere. This can be achieved by acid etching and neutralizing the concrete or by mechanically grinding the concrete with a floor grinder (best practice).

The Epoxy Max 100 is available as a two-component kit containing a Part A and a Part B. Part A and Part B are mixed together throughly with a large drill paddle or jiffy mixer. Once Part A and Part B are mixed, the Epoxy Max 100 must be applied within 10-40 minutes. Once the surface has been properly prepared, the Epoxy Max 100 can then be applied with an epoxy glide roller or squeegee. About 8-24 hours after applying the Epoxy Max 100, a topcoat can then be applied.

The Epoxy Max 100 is available clear; however, a color additive may be mixed in with Epoxy Max 100 Part A at time of application. Use the Armor-Tek 830 as a top coat in clear or solid color floors.

Decorative flakes can be cast into the wet Epoxy Max 100 and then top coated with the Polyaspartic 930 concrete floor coating.

If you would like to achieve a metallic floor, first apply a coat of Epoxy Max 100 mixed with a color additive. Next apply an additional coat of Epoxy Max 100 mixed with a metallic additive. Lastly use the Armor-Tek 830 as a topcoat.

The combination of the Epoxy Max 100 and a topcoat is an excellent choice to stop concrete dusting, repel oils, greases, chemicals and acids. Keep in mind the Epoxy Max 100 can only be used on indoor concrete floors.

If there is moisture in the concrete prior to application, first use the Vapor-Tek 440.

The Micro-Degreaser 1100 concrete cleaner and degreaser can be used to degrease and remove soils and stains prior to using the Epoxy Max 100.

The Hydro-Etch 1000 concrete acid etcher can be used to etch the concrete prior to applying the Epoxy Max 100.

The Lithi-Tek 4500 is a penetrating lithium silicate concrete densifier that can make concrete up to 50% stronger. Lithium silicate concrete densifiers penetrate deeper and work better than traditional sodium silicate concrete densifiers. The Lithi-Tek 4500 can also be used as a primer on poured concrete substrates before using a concrete sealer. In addition to making the concrete stronger, the Lithi-Tek 4500 acts as a bonding agent to increase the adhesion of the subsequent concrete sealer. The Lithi-Tek 4500 also makes concrete less porous and works great when used in conjunction with a water repellent penetrating sealer.

By using the Lithi-Tek 4500 prior to polishing concrete it will make the concrete harder and will give it more of a shine to resist stains and water damage. If a concrete densifier is not used during the polishing process the concrete can wear faster and lose its shine quicker.

Lithi-Tek 4500 is concentrated and needs to be mixed with distilled water prior to application. 1 part Lithi-Tek 4500 is mixed with 1 part water. One coat is applied with either a sprayer or roller.

If a concrete floor has a high moisture content the Vapor-Tek 440 is the product to use. This two-component epoxy coating is designed to reduce moisture vapor emission rates of up to 20lb/24hr/1000ft. If you are going to be installing carpet, tile or wood this is the product to use to prevent any moisture from traveling and dis-bonding the flooring. It is also an excellent choice to use the Vapor-Tek 440 as a primer before installing an epoxy floor.

Each gallon will cover up to 100 square feet at 16 mils thickness and will leave a clear, gloss finish. Part A is mixed with Part B prior to application and installed with an epoxy glide roller or squeegee. The Vapor-Tek 440 will stop dusting, can be applied to concrete as little as 10 days old and only requires one coat.

The Vapor-Tek 440 does have a short pot life which means once Part A and Part B are mixed together it needs to be applied within 5-25 minutes. Once the pot life has been reached the product can no longer be applied. Mix in smaller batches following the 2 Parts A to 1 Part B ratio to extend the pot life. The Vapor-Tek 440 is dry and ready for foot traffic within 24 hours and fully cured in 3-7 days.

When you are looking to add a solid color gloss finish to a concrete substate, the Pro-Fusion 1505 is an excellent choice. Since the Pro-Fusion 1505 is water-based, it is completely safe to use with no odor. It locks color deep below the surface, hiding imperfections to make concrete surfaces look beautiful, even, and consistent in appearance. It is capable of providing a uniform color or enhanced “mottled” color look on stamped concrete.

The Pro-Fusion 1505 can be used as a stand alone concrete stain, or as part of a concrete stain system.

Optional Step 1: If the substrate is extremely old or porous use the Pro-Fusion 1505 Primer first.

Required Step 2: Pro-Fusion 1505 available in 6 standard colors: Tan, Dark Tan, Medium Gray, Dark Gray, Brown, Dark Red

Optional Step 3: If you are looking for additional color enhancement and depth especially on stamped concrete to highlight groves and patterns use the Pro-Fusion 1505 Enhancer after using the Pro-Fusion 1505 Stain. Available in 3 standard colors: Chocolate, Charcoal, Mocha

The Cryli-Tek 5500 is always recommeded as the top coat concrete sealer for added UV protection and longevity.

This unique concrete stain formula is a safe alternative to acid-based stains containing no hazardous components while producing the same mottled look as acid stains. There is no neutralizing or rinsing required. This concrete stain is shipped concentrated and mixed with water prior to application.

Provides a flat, natural finish. Can be applied at full strength or diluted with water for a lighter color. Colors can also be mixed and applied in random patterns. Available in 6 standard colors. A decorative concrete sealer like the Cryli-Tek 5505 is recommended after staining concrete to ensure long lasting protection and color enhancement.

The Polyaspartic 745 is typically used in commercial kitchens and bars since it is the most durable concrete countertop sealer available. The Polyaspartic 745 can also be used on warehouse floors and is able to stand up to forklift traffic, chemicals and abrasions so using it on a concrete countertop is a no brainer. The Polyaspartic 745 can only be used on interior concrete countertops and leaves the surface with a high gloss finish.

Since it is a concrete coating rather than a concrete sealer it sits on top of the concrete providing a smooth surface environment that allows for easy clean up and completely stops anything from penetrating through it.

Before applying the Polyaspartic 745 we recommend sanding the concrete countertop with a 220 grit pad to ensure the surface has enough porosity for the coating to adhere to. The Polyaspartic 745 is sold in a 2 part kit, so you need to mix Part A with Part B. It has a short workable life, which means once you mix Part A with Part B you have about 15 minutes to apply it before it begins to harden and is unworkable.

You do need to let the concrete countertop dry for at least a full 24 hours before use. Once cured you are left with an extremely durable, high gloss concrete countertop.

If you are looking for a low sheen finish on your concrete countertops that is not as glossy as the 745 but not as flat as the Countertop Sealer 880, the Countertop Sealer 660 is an excellent option. Especially since is completely non-toxic, water-based and safe for interaction with food once cured.

The Countertop Sealer 660 is easy to apply; simply mix the concentrated solution with equal parts water and spread the solution over the concrete countertop with a rag for five minutes. Continuously make sure the concrete countertop is wet for the whole five minutes, then let the sealer completely penetrate into the concrete without wiping it up. After the surface has dried, apply another coat at a 3:1 ratio of sealer to water, which will help fully protect your concrete countertops.

Use in conjunction with a concrete countertop wax for an extra layer or protection.

The Countertop Sealer 880 is a solvent-carried food safe (once cured) concrete sealer that will not change the look or appearance of the concrete countertop whatsoever. The Countertop Sealer 880 leaves a similar finish to the Countertop Sealer 770; however, its high actives content, ease of application, deeper penetration and longer lifespan set it apart.

The Countertop Sealer 880 is able to resist light staining from household substances causing fluids to sit on top of the concrete rather than penetrating into the concrete giving you a few extra minutes time to wipe up the spill.

The Countertop Sealer 880 is easy to apply and is ready to use right out of the container - no mixing is required. Two coats wet-on-wet (immediately apply a second coat while the first coat is still wet) are recommended.

Use in conjunction with a concrete countertop wax for an extra layer or protection.

The Polyaspartic 930 topcoat floor coating is typically applied about 8-24 hours after applying the Epoxy Max 100 basecoat. If more than 24 hours have elapsed since the Epoxy Max 100 basecoat has been applied it is best to lightly sand the surface of the Epoxy Max 100 to maximize the bond and adhesion of the Polyaspartic 930.

The Polyaspartic 930 concrete floor coating is available clear and in a two-component kit. Each kit contains a Part A and a Part B. Part A and Part B are mixed together with a drill or jiffy mixer. Once Part A and Part B are mixed the Polyaspartic 930 concrete floor coating must be applied within 60 minutes.

One coat of the Polyaspartic 930 concrete floor coating is best applied with an epoxy glide roller. The Polyaspartic 930 concrete floor coating leaves a high gloss finish and is easy to apply.

The combination of the Epoxy Max 100 basecoat, flakes and the Polyaspartic 930 topcoat stop concrete dusting, repel oils, greases, chemicals and acids.

The Armor-Tek 830 is typically applied about 8-24 hours after applying the Epoxy Max 100 basecoat. If more than 24 hours have elapsed since the Epoxy Max 100 basecoat has been applied it is best to lightly sand the surface of the Epoxy Max 100 to maximize the bond and adhesion of the Armor-Tek 830.

The Armor-Tek 830 is available in a clear, two-component kit. Each kit contains a Part A and a Part B. Part A and Part B are mixed together with a paint stick (do not use a drill or jiffy mix to mix). Once Part A and Part B are mixed the Armor-Tek 830 must be applied within 20-25 minutes.

One coat of the Armor-Tek 830 concrete floor coating is best applied with an epoxy glide roller. The Armor-Tek 830 concrete floor coating leaves a satin or gloss finish.

The combination of the Epoxy Max 100 basecoat and the Armor-Tek 830 topcoat will stop concrete dusting, repel oils, greases, chemicals and acids.

Engineered to perfection, this formulation not only delivers unmatched resistance against water, food stains and oil, but also provides a non-slip, low satin sheen. This product is a completely breathable concrete surface stain repellent.

Pro-Shield 8506 serves as a fluoro-free (free of PFAS, without any long-term environmental health impacts), film-free, stain shield, safeguarding smooth concrete floors from a range of intrusive substances like water, ketchup, coffee, vinegar, oil, grease, and more.